Finishes - Paper bag printing
Hot foil stamping
Example: Paper carrier bags, hot foil on matt foil lamination, offset black - Schloss Schwarzenfeld, Germany
Edition: 1,000 pieces
Format: 30 cm width x 40 cm height x 10 cm depth + 5 cm margin cover
Material: 210 g/m² American Bristol, white, coated on one side
Printing: Offset printing, 1 colour black
Hot foil print: in gold / front and back - same motif / size: approx. 21 x 8 cm
Finishing: matt cellophane (matt foil)
Cord: cotton / diameter: 5-6 mm / colour: black, length: 2*50 cm (hand length) / knotted
Processing: as an exclusive carrier bag with bottom cardboard and incorporated edge cover reinforcement
Example: Exclusive paper bags with satin ribbons, hot foil stamping - Gold Gretchen, Miana
Accessories OHG, Berlin, www.mygretchen.com
Edition: 3 sizes 500 pieces each
Format 1: 32 cm width x 26 cm height x 10 cm depth + 5 cm margin cover
Format 2: 45 cm width x 35 cm height x 10 cm depth + 5 cm margin cover
Format 3: 58 cm width x 47 cm height x 16 cm depth + 5 cm margin cover
Material: 220 g/m² kraft paper, white
Embossing: Hot foil stamping gold (motif identical in size for the 3 formats)
Domain: same size on sides and inside = 16 cm wide
Logo: front and back 28 cm wide
Finishing: no cellophaning
Grip tape: colour: gold (if possible matching the embossing), tape: cotton
Format 1 and 2: 2*50cm length, 2 cm width, knotted
Format 3: 2*70cm length, 2 cm width, knotted, length: 2*50 cm, width: 2 cm
Processing: as exclusive
paper carrier bag: with incorporated bottom reinforcement and edge wrap reinforcement
Shipping: 3 formats one delivery - free house (to curb or ramp)
Euroscale, cut-out: partial hot foil stamping in gold.
1. the pink printed as Pantone in offset, over it 2.) an already holographic looking lamination, thanks to the iridescent metal elements interspersed in the lamination foil, in addition 3.): partial hot foil stamping with holographic foil, 4.) cord with silver threads shot in.
Partial hot foil stamping on a 100% offset printed background. Between the hot foil embossing and the printed surface there is a matt foil lamination.
Hot foil stamping to complete the finishing steps of this exclusive paper carrier bag: hot foil stamping in gold on UV spot varnish (the small logos CM). These two elements are again on a matt foil. Thus, these two finishes contrast with the background. Underneath the matt foil lamination lies a 100% flat offset printed blue background.
Partial hot foil stamping in gold on ragged, ribbed natural cardboard. No offset printing on this bag.
Paper bag printed with hot foil stamping only, "letterpress".
On 1. offset printed all-over font, 2. matt foil, 3. purple gold hot foil stamping of the lettering, 4. raised relief stamping of the lettering.
On 1. cardboard pre-stamped as metallic coloured imitation snakeskin, 2. CI lettering motif in partial hot foil stamping, 3. raised relief stamping of the lettering.
In use as a cross-promotion or teaser: a small two-dimensional cord bag - punched out and the teaser threaded into the run of the cord.
As you can see, printing paper bags is very free and exclusive in the finishing options.
Example: Paper sales bag for ties - Edsor Flagship Store, Hackische Höfe, Berlin
Edition: 2,000 pieces
Format: 23 cm width x 42 cm height x 7 cm depth
Material: 190 g/m² packaging board, one side matt coated 1.25 times volume
Print: Offset print 4/0-colour CMYK
Finishing: 1. OPP foil lamination matt, 2. hot foil stamping gold on both front sides - format 7.3 x 8.2 cm
Handles: 2 x PP cord, Ø 6 mm, length 50 cm, knotted
Processing: as simple
paper carrier bag: with integrated bottom reinforcement 450 g/m² and edge wrapping reinforcement 650 g/m²
Shipping: free delivery Germany one address - curb or ramp
UV spot varnishing
Example: Paper bag, offset print, matt laminated, UV spot varnish - Jewish Life, Erfurtwww.atelierpapenfuss.de
Edition: 1,000 pieces
Format: 16 x 23 x 8 cm + approx. 5 cm (width x height x depth + edge cover)
Material: 190 g/m² Bristol paper
Print: 2/1 colour offset print - Pantone 398U / 4975C
Finishing: matt laminated, UV spot varnish on both front sides identical
Cord: Two plastic cords, knotted inside, length 2 x 30 cm, 5-6 mm Ø, colour 514
Processing: as exclusive
Paper carrier bag: with glued bottom board 650 g/m² and incorporated edge cover reinforcement 650 g/m²
Packing: handily and safely packed in cardboard boxes, on pallets
Shipping: free to the door (one address in Germany), kerbside or ramp
Example: Closure label, integrated into the pocket design, cord pocket - Viessmann
Format: a) Bag: 25 cm width (W) x 35 cm height (L) x 12 cm depth (W) + 5 cm edge fold b) Label: 3 x 8 cm
Bag material: 185 g/m² American Bristol, white, coated on one side
Print: a) Bag - offset print/2-colour Pantone - front and back printed with VIESSMANN logo b) Label - offset print/1-colour Pantone for orange - + negative print = white VIESSMANN
Colour definition: grey: Pantone silver 877 / orange: Pantone GOE 19-1-6 C
Finishing: glossy cellophane (with glossy foil)
Handle: PP cord, colour: silver-grey, diameter: 6 mm / length: 2*50 cm, incl. knot
Processing: 1. as exclusive paper carrier bag with incorporated bottom reinforcement and edge wrap reinforcement
2. closure label folded in the middle, punched in the back over the narrow side, adhesive protection peeled off to one half and glued to the front of the bag. Glue the closure label with this half (=4cm) to the upper edge of the bag. The other half of the label (=4cm) with adhesive protection reaches into the pocket opening, there in the pocket opening before use: unglued.
- PSI:
- Member No.: 48072
All Rights Reserved SitemapPrivacy PolicyTerms and ConditionsCookie usageWorth knowingLegal Notice of BagobagCookie Settings
Sign In